885053 1880 mhz baw filter data sheet: rev d 09- 17 - 2014 - 1 of 6 - disclaimer: subject to change without notice ? 201 4 triquint applications ? general purpose rf filter ? for base station applications ? wireless infrastructure ? 4g, multi-standard ? band 2 uplink ? repeaters smp- 12 , 3.00 x 3.00 x 1.22 mm pin configuration - single ended pin no. label 2 input 5 output 1.3,4 ,6 ground functional block diagram 4 2 3 1 6 5 input output gnd gnd gnd gnd product features ? usable bandwidth 60 mhz ? 35 db rejection at 1930 mhz ? high attenuation ? excellent power handling ? low loss ? single-ended operation ? no matching required for operation at 50 ? small size: 3.00 x 3.00 x 1.22 mm ? ceramic surface mount package (smp) ? hermetically sealed ? rohs compliant, pb -fre e general description 885053 is a general purpose uplink filter for band 2. this filter was specifically designed in a 3x3mm hermetic package for base station and repeater applications and is part of our wide portfolio of rf filters in the same package. low insertion loss, coupled with high attenuation and excellent power handling, makes this filter a natura l choice for our customers uplink rf filtering needs and other general purpose applications. ordering information part no. description 885053 product description 885053- evb evaluation board description standard t/r size = 5000 units/reel pb downloaded from: http:///
885053 1880 mhz baw filter data sheet: rev d 09- 17 - 2014 - 2 of 6 - disclaimer: subject to change without notice ? 201 4 triquint parameter rating storage temperature - 40 to +125 c operating temperature (1) - 40 to + 95 c rf input power cw, +95c for 1000 hours +30 dbm cw, +95c for 2 hours +33 dbm 1. operation of this device outside the parameter ranges given may cause permanent damage. absolute maximum ratings electrical specifications (1) test conditions unless otherwise noted: (2) temp= - 40 c to + 95 c parameter (3 ) conditions min typ (4) max units center frequency - 1880.0 - mhz max imum insertion loss 1850 C 1910 mhz - 2.0 2.8 db amplitude variation (5) 1850 C 1910 mhz - 1.0 1.8 db p-p group delay variation (5) 1850 C 1910 mhz 18 50 C 19 10 mhz over any 5 mhz span 1855 C 1905 mhz over any 5 mhz span - - - 27 9 7 40 15 12 ns p-p ns p-p ns p-p absolute attenuation (6) 9 C 1475 mhz 1475 C 1570 mhz 1570 C 1725 mhz 1725 C 1755 mhz 1755 C 1805 mhz 1805 C 1830 mhz 1930 C 1935 mhz 1935 C 1990 mhz 1990 C 2170 mhz 2170 C 2700 mhz 2700 C 3800 mhz 3800 C 5000 mhz 30 35 40 35 30 20 35 45 30 15 10 5 41 47 44 40 35 34 45 50 50 35 25 20 - - - - - - - - - - - - - db db db db db db db db db db db db input vswr 1850 C 1910 mhz - 1.9 2.5:1 - output vswr 1850 C 1910 mhz - 1.9 2.5:1 - source impedance (7) single-ended - 50 - ? load impedance (7) single-ended - 50 - ? notes: 1. all specifications are based on the triquint schematic shown on page 3 2. in production, devices will be tested at room temperature to a gua rdbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account fo r the variations due to temperature drift and manufacturing tolerances 4. typical values are based on average measurements at room temp erature 5. amplitude variation is defined as the difference between the low est loss and the highest loss within defined frequency points 6. relative to zero db 7. this is the optimum impedance in order to achieve the performa nce shown downloaded from: http:///
885053 1880 mhz baw filter data sheet: rev d 09- 17 - 2014 - 3 of 6 - disclaimer: subject to change without notice ? 201 4 triquint evaluation board matching schematics 960700 jjjym xx 1,3,4,6 2 5 50 50 ? ? notes: 1. no impedance matching required 2. pcb: . top, middle & bottom layers: 1 oz copper, substrates: fr4 dielectric, .0 31 thick, finish plating: nickel: 3 -8m thick, gold: .03-.2m thick, hole plating: copper min .0008m thi ck bill of material C 885053- evb reference des. value description manuf. part number u1 n/a 1880 mhz baw filter triquint 885053 sma n/a sma connector radiall usa inc. 9602-1111-018 pcb multiple 960700 pcb mounting pattern .96 3.20 sq 1.27 .38 .81 1.70 notes: 1. all dimensions are in millimeters. angles are in degrees. 2. this drawing specifies the mounting pattern used on the triquin t evaluation board for this product. some modification may be nece ssary to suit end user assembly materials and processes. downloaded from: http:///
885053 1880 mhz baw filter data sheet: rev d 09- 17 - 2014 - 4 of 6 - disclaimer: subject to change without notice ? 201 4 triquint performance plots test conditions unless otherwise noted: temp= +25c frequency response d b frequency (mhz) -70 -60 -50 -40 -30 -20 -10 0 1755 1817.5 1880 1942.5 2005 passband response d b frequency (mhz) -12 -10.5 -9 -7.5 -6 -4.5 -3 -1.5 0 1820 1850 1880 1910 1940 wideband response d b frequency (mhz) -70 -60 -50 -40 -30 -20 -10 0 5 1255 2505 3755 5005 input / output vswr l i n m a g l i n m ag frequency (mhz) 1 1.5 2 2.5 3 1820 1850 1880 1910 1940 1 1.5 2 2.5 3 1820 1850 1880 1910 1940 input smith chart -1 -0 .8 -0 .6 -0 .4 -0 .2 0 0.2 0.4 0.6 0.8 1 -1 -0 .5 0 0.5 1 output smith chart -1 -0 .8 -0 .6 -0 .4 -0 .2 0 0.2 0.4 0.6 0.8 1 -1 -0 .5 0 0.5 1 downloaded from: http:///
885053 1880 mhz baw filter data sheet: rev d 09- 17 - 2014 - 5 of 6 - disclaimer: subject to change without notice ? 201 4 triquint package information, marking and dimensions 0.69 1.22 nom. 1.32 max. 0.75 0.60 1.50 0.75 3.00 3.00 84 code marking date code jjjy m logo id dot triquint package style: smp- 12 a dimensions: 3.00 x 3.00 x 1.22 mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0 m, over a 2-6 m ni plating all dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm the date code consists of day of the current year (julian, 3 digits), y = last digit of the year, and m = manufacturing site code notes: 1. all dimensions shown are typical in millimeters 2. an asterisk (*) in front of the marking code indicates prototype. tape and reel information standard t/r size = 5000 units/reel. all dimensions are in mil limeters 3.25 section a-a 1.75 ?1.5 4.0 a 12.0 5.5 ?1.5 4.0 2.0 3.25 1.4 0.21 a ?102 ?20.2 ?13.0 2.0 direction of travel ?330 12.8 2.7 logo id dot triquint downloaded from: http:///
885053 1880 mhz baw filter data sheet: rev d 09- 17 - 2014 - 6 of 6 - disclaimer: subject to change without notice ? 201 4 triquint product compliance information esd sensitivity ratings caution! esd-sensitive device esd rating: class 3b value: passes 8000 v test: electrostatic discharge sensitivity testing, human body model (hbm) - component level standard: esda/jedec js- 001 -2012 esd rating: class c value: passes ? 800 v test: machine model ( mm ) standard: jedec standard jesd22-a115 solderability compatible with both lead-free (260c maximum reflow temperature) and tin/lead (245c maximum reflow temperature) soldering processes. refer to soldering profile for recommended guidelines. rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating not applicable. hermetic package. contact informati on for the latest specifications, additional product information, worldwide sales and di stribution locations, and information about triquint: web: www.triquint.com tel: +1.407.886.8860 email: info-sales@tqs.com fax: +1.407.886.7061 for technical questions and application information: email: flapplication.engineering@tqs.com important notice the information contained herein is believed to be reliable. triquint ma kes no warranties regarding the information contained herein. triquint assumes no responsibility or liability wh atsoever for any of the information contained herein. triquint assumes no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with al l faults, and the entire risk associated with such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explici tly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to suc h information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life-saving, or life- sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. downloaded from: http:///
|
